Fitment Center - Vehicle-Specific Parts - Universal Parts

Find Parts That Actually Fit Your Build

Check fitment by year, make, model, trim, drivetrain, transmission, engine, engine code, and chassis. This page is built to help you filter direct-fit parts, parts that need trimming or fabrication, and universal parts that still need proper planning before you buy.

Check Fitment Need Expert Confirmation Shop All Parts
8Demo fitment records
8Current matches
0In compare
0Saved garage vehicle
Current selection
No vehicle selected yet
Use the filters below to narrow by vehicle and build purpose. Verified and guaranteed-fit listings should be treated with higher confidence than parts marked modification required, fabrication required, or universal plumbing required.
Saved session garage
No vehicle saved yet.
This version saves one vehicle in your session. Later you can wire it into your garage/account system.
Before you buy
For turbo kits, big brake kits, fabricated chassis parts, and custom fuel system parts, fitment should be confirmed with wheel specs, trim, engine code, transmission, and photos of the current setup.

Vehicle and Fitment Filters

Reset Filters
Direct Fit Guaranteed Fit Modification Required Fabrication Required Universal / Plumbing Required

Save Vehicle To Session Garage

Fitment Results

Showing 8 matched parts based on your current filters.
Verified before Common Fitment Check wheel clearance on brake parts Tune warning shown when needed
Direct Fit Aluminum Radiator
LifeStyle Racing - Cooling System

Direct Fit Aluminum Radiator

****+ 4.9 (76)
Guaranteed Fit Verified 1999-2005 Mazda Miata Base / LS / SE / Mazdaspeed Street Performance Street / Track In Stock On Sale
What it fits1999-2005 Mazda Miata Base / LS / SE / Mazdaspeed
Engine / Code1.8L BP / Turbo - BP-4W / BP-Z3
Chassis / Drive / TransNB - RWD - Manual / Automatic
Why it fits Core dimensions and mounting provisions are specific to NB radiator support layout.
Fitment notes Factory-style hose locations and mounting tabs for NB chassis cars.
Install notes Use proper coolant bleed procedure and inspect fan shroud alignment.
You may also need Radiator cap, coolant hoses, fan shroud, coolant
$429.99$479.99
SKU: COL-107
MPN: LSR-NB-RAD-01
Fitment confidenceVerified
Wheel clearanceNot Required
StockIn Stock - Qty 7
View Product
Need Fitment Confirmation
Street Intake System
LifeStyle Racing - Naturally Aspirated Air Induction

Street Intake System

****+ 4.7 (42)
Direct Fit Verified 2015-2021 Subaru WRX Base / Premium / Limited Street Performance Street / Track In Stock On Sale Tune Required
What it fits2015-2021 Subaru WRX Base / Premium / Limited
Engine / Code2.0L Turbo FA20 - FA20DIT
Chassis / Drive / TransVA - AWD - Manual / CVT
Why it fits Matches FA20DIT intake routing and mounting on VA chassis WRX models.
Fitment notes Designed for factory-style mounting points and airbox replacement. Confirm MAF housing sizing before purchase.
Install notes Tune strongly recommended after install. Recheck clamps after first heat cycle.
You may also need Panel filter, turbo inlet coupler inspection, ECU tune
$289.99$329.99
SKU: NAI-101
MPN: LSR-FA20-INT-01
Fitment confidenceVerified
Wheel clearanceNot Required
StockIn Stock - Qty 12
View Product
Need Fitment Confirmation
Track Coilover Suspension System
LifeStyle Racing - Suspension

Track Coilover Suspension System

****+ 4.6 (58)
Direct Fit Verified 2013-2024 Toyota 86 Base / Premium / Trueno / GR86 Drifting / Time Attack Grip / Handling In Stock
What it fits2013-2024 Toyota 86 Base / Premium / Trueno / GR86
Engine / Code2.0L FA20 / 2.4L FA24 - FA20 / FA24
Chassis / Drive / TransZN6 / ZN8 - RWD - Manual / Automatic
Why it fits Built around BRZ/86 chassis suspension pickup points and strut dimensions.
Fitment notes Works with factory mounting points. Final wheel alignment required.
Install notes Set preload correctly. Recheck lock rings after first drive.
You may also need Rear lower control arms, alignment hardware, sway bar end links
$1,849.99
SKU: SUS-104
MPN: LSR-86-COIL-01
Fitment confidenceVerified
Wheel clearanceCheck wheel and tire package after ride height change
StockIn Stock - Qty 8
View Product
Need Fitment Confirmation
Turbo Downpipe
LifeStyle Racing - Exhaust

Turbo Downpipe

****+ 4.8 (38)
Direct Fit Verified 2017-2021 Honda Civic Type R FK8 Street Performance High Horsepower In Stock Tune Required
What it fits2017-2021 Honda Civic Type R FK8
Engine / Code2.0L Turbo K20C1 - K20C1
Chassis / Drive / TransFK8 - FWD - Manual
Why it fits Flange geometry and routing are made around FK8 turbo and tunnel placement.
Fitment notes Intended for FK8 chassis and stock-style turbo location.
Install notes Tune required after install. Check heat management near steering rack and firewall.
You may also need Gaskets, hardware, tune, heat wrap or shield
$549.99
SKU: EXH-108
MPN: LSR-FK8-DP-01
Fitment confidenceVerified
Wheel clearanceNot Required
StockIn Stock - Qty 5
View Product
Need Fitment Confirmation
6-Piston Front Big Brake Kit
LifeStyle Racing - Performance Brakes

6-Piston Front Big Brake Kit

****+ 4.8 (33)
Wheel Clearance Check Required Verified 2018-2024 Ford Mustang GT GT / Bullitt / Mach 1 Circuit Racing Track Ready Low Stock On Sale
What it fits2018-2024 Ford Mustang GT GT / Bullitt / Mach 1
Engine / Code5.0L V8 - Coyote
Chassis / Drive / TransS550 - RWD - Manual / Automatic
Why it fits Hat offset and caliper brackets are built around S550 front upright geometry.
Fitment notes Wheel spoke and barrel clearance must be confirmed before ordering.
Install notes Torque all caliper hardware to spec. Bedding procedure required.
You may also need High-temp fluid, stainless lines, pad compound matched to use
$2,199.99$2,399.99
SKU: BRK-103
MPN: LSR-S550-BBK6
Fitment confidenceVerified
Wheel clearance19-inch wheel minimum with spoke clearance verification
StockLow Stock - Qty 2
View Product
Need Fitment Confirmation
Front Mount Intercooler Kit
LifeStyle Racing - Forced Air Induction

Front Mount Intercooler Kit

****+ 4.9 (27)
Modification Required Needs Review 2020-2024 Toyota GR Supra 3.0 / Premium / A91 Roll Racing 600+ HP In Stock Trimming Required
What it fits2020-2024 Toyota GR Supra 3.0 / Premium / A91
Engine / Code3.0L Turbo B58 - B58B30
Chassis / Drive / TransA90 / A91 - RWD - Automatic
Why it fits Core sizing and bracket geometry are based on A90/A91 front-end packaging.
Fitment notes Minor trimming may be needed depending on bumper ducts, crash beam tolerances, and aftermarket aero.
Install notes Pressure test after install. Check charge pipe coupler alignment.
You may also need Charge pipes, upgraded clamps, boost leak test kit
$1,199.99
SKU: FAI-102
MPN: LSR-B58-FMIC-01
Fitment confidenceNeeds Review
Wheel clearanceNot Required
StockIn Stock - Qty 4
View Product
Need Fitment Confirmation
Tube Front Crash Bar
LifeStyle Racing - Chassis Reinforcement

Tube Front Crash Bar

****- 4.4 (9)
Fabrication Required Needs Review 2009-2016 Nissan 370Z Base / Sport / NISMO Drifting / Time Attack Track Ready Build To Order Trimming Required Drilling Required Fabrication Required
What it fits2009-2016 Nissan 370Z Base / Sport / NISMO
Engine / Code3.7L VQ37VHR - VQ37VHR
Chassis / Drive / TransZ34 - RWD - Manual / Automatic
Why it fits Main structure follows Z34 front rail spacing, but race-build variation means final fit must be confirmed.
Fitment notes For race-oriented builds. Front bumper trimming and custom accessory placement may be required.
Install notes Not intended for casual bolt-on installs. Confirm cooling stack and oil cooler routing.
You may also need Intercooler support planning, tow hook provision, bumper support hardware
$599.99
SKU: CHR-106
MPN: LSR-Z34-CRASH-01
Fitment confidenceNeeds Review
Wheel clearanceNot Required
StockBuild To Order
View Product
Need Fitment Confirmation
Universal AN Fuel Pressure Regulator
LifeStyle Racing - Fuel Delivery

Universal AN Fuel Pressure Regulator

****+ 4.5 (21)
Universal / Plumbing Required Common Fitment Universal Fitment Drag Racing High Horsepower In Stock On Sale Drilling Required
What it fitsUniversal Fitment
Engine / CodeUniversal - Universal
Chassis / Drive / TransUniversal - Any - Any
Why it fits Universal regulator body can support many custom fuel system layouts.
Fitment notes Universal part. Requires custom line routing, fitting selection, and secure mounting location.
Install notes Verify feed and return sizing before purchase. Check compatibility with fuel type.
You may also need AN lines, fittings, bracket, gauge or pressure sensor
$189.99$214.99
SKU: FUE-105
MPN: LSR-FPR-AN10
Fitment confidenceCommon Fitment
Wheel clearanceNot Required
StockIn Stock - Qty 15
View Product
Need Fitment Confirmation

Compare Fitment

Add up to 4 parts to compare fitment type, confidence, price, and install requirements.

Recently Viewed Fitment Parts

Nothing saved yet. Use the "Save To Recently Viewed" button on a part card.

Fitment FAQ

What does guaranteed fit mean?

It means the part is listed as a direct match for the specified application with a higher level of confidence. You still need to verify details like trim, wheel specs, and supporting modifications when relevant.

What does modification required mean?

It means the part may fit the vehicle family but can require trimming, custom piping, relocation of nearby components, or other minor changes depending on your exact setup.

When does wheel clearance matter?

Mostly on big brake kits and some suspension packages. Wheel diameter alone is not enough. Spoke profile, barrel shape, offset, and spacer use can all change whether a part clears.

Why do engine code and chassis code matter?

Marketing names can hide differences in engine families, mounting points, accessory placement, and chassis revisions. Engine code and chassis code help prevent expensive mistakes.

What should I send for fitment confirmation?

Year, make, model, trim, engine, engine code, drivetrain, transmission, wheel specs, current mods, and photos of the engine bay or area where the part installs.

Why are universal parts still on this page?

Because many high-performance fuel, cooling, plumbing, and race-support parts are universal in form but still relevant to your build. They just need a different planning level than direct-fit parts.

Need Us To Confirm Fitment Before You Buy?

Use this section as a customer-facing fitment help block. It is built so you can later connect it to email, admin review, or a vendor inquiry flow. For now it gives you the full structure customers need to provide useful information the first time.

Good fitment requests include exact trim, engine code, drivetrain, transmission, wheel specs for brake kits, and photos of the current setup. That cuts down on returns and customer frustration.
Email Support
Newsletter Subscription